Subaru Outback Bolt Pattern | All Model Years

subaru outback towing a trailer

At Conley Subaru, we get wheel-fitment questions all the time from Outback owners who are swapping to winter wheels, upgrading to a new look, or trying to reuse a set from a previous Subaru. The single most important number to confirm first is the bolt pattern (also called lug pattern or PCD), because even a wheel that looks “close” will not mount safely if that pattern is wrong. Below is the Subaru Outback bolt pattern for every model year, grouped anywhere Subaru kept the same spec, with the newest Outbacks listed first.

2015-Present Subaru Outback

Bolt pattern: 5×114.3

This is the major modern “break point” for Outback wheel fitment. Many wheel retailers note that Outbacks switched to a 5×114.3 bolt pattern beginning with the 2015 model year.
You’ll also commonly see 56.1 mm center bore and M12x1.25 thread size listed for late-model Outback fitment guides, which matters if you’re shopping aftermarket wheels, hub-centric rings, or replacement lug nuts.

1995-2014 Subaru Outback

Bolt pattern: 5×100

For every Outback model year from the first generation in 1995 through 2014, the Outback uses a 5×100 bolt pattern.
This is why wheels that fit a 2014 Outback typically do not fit a 2015 Outback without adapters (and we generally recommend avoiding adapters unless you have a very specific, professional use case and know exactly what you’re doing).

Quick fitment tips we use in the service lane

Bolt pattern gets you in the door, but it’s not the whole story. When customers ask us “will these wheels fit my Outback?”, we also confirm:

  • center bore (hub bore) so the wheel seats correctly (many late-model fitment guides list 56.1 mm)

  • thread size so your lug nuts match (commonly listed as M12x1.25 on late-model guides)

  • wheel width and offset to keep proper clearance to brakes, struts, and fenders

If you’re reusing wheels from another vehicle, the bolt pattern alone can be misleading. For example, a wheel might be 5×114.3 but have the wrong center bore or offset for an Outback, so it won’t sit correctly or may rub under load.

Conclusion

Here’s the simple way to remember Subaru Outback bolt patterns by model year: 2015-2026 are 5×114.3, while 1995-2014 are 5×100.
If you’re shopping wheels or trying to reuse a set you already own, Conley Subaru can help you verify fitment the right way (bolt pattern plus hub bore, lug hardware, and offset) so your Outback drives the way it should.